TQ6000 GEN2 Access Points User's Guide
Changing the Manager's Login Name and Password
178
This procedure explains how to change the login name and password of
the manager account on the access point. The default values are
"manager" and "friend", respectively. The access point has only one
manager account.
Changing the name and password does not affect your current
management session.
Note
Allied Telesis strongly recommends changing the factory default
password during the first management session to protect the device
from unauthorized access.
To change the login name and password of the manager account, perform
the following procedure:
1. Select Account > User from the main menu, Refer to Figure 60.
2. To change the manager name, select the Administrator Name field
and enter a new name. Here are the guidelines:
The name can be up to 12 alphanumeric characters.
The first character must be a letter. It cannot be a number or
special character.
The name is case-sensitive.
The default name: manager
Figure 60. User Window