Snmpv1, Snmpv2C, And Snmpv3 - Allied Telesis TQ6000 GEN2 Series Management Software User Manual

TQ6000 GEN2 Access Points User's Guide
SNMPv1,
SNMPv2c, and
SNMPv3
22
You can use SNMPv1, SNMPv2c, and SNMPv3 to view the parameter
settings of the access point. The MIB is available from Allied Telesis
website. For instructions on how to configure the access point for SNMP,
see "Configuring SNMPv1, SNMPv2, and SNMPv3" on page 57.
Note
You cannot change the parameter settings on the access point with
SNMP.