Table of Contents
Advertisement
Configuring
Advanced Radio
Settings
Table 16. Basic Radio Settings Window (Continued)
Field
Bandwidth
Select the bandwidth for Radio2 from the pull-down
(Radio2)
menu. The available bandwidths for
IEEE 802.11n/ac/ax are listed here:
- 20 MHz. This is the default setting.
- 40 MHz
- 80 MHz
- 80+80 MHz
The only bandwidth for IEEE 802.11a is 20 MHz.
Auto Channel
Select the channels that the radio can choose from
Selection
when the Channel parameter is set to Auto. Here are
(Radio 1)
the guidelines:
- A channel is enabled when its check box has a
- The available channels very by radio, mode,
- By default, all available channels are enabled.
- This parameter is disabled when the channel is
Tx Power
Select the strength of the radio transmitter. The
selections are Max (maximum), High, Middle, Low,
Min (minimum). The default is Max.
5. Click the SAVE & APPLY button to save and update the configuration.
To configure the advanced parameters for Radio1 or Radio2, perform the
following procedure:
1. Select Settings > Radio from the main menu.
2. Select Radio1 or Radio2 from the sub-menu. You can configure only
one radio at a time.
3. Click the Advanced Settings tab. See Figure 28 on page 82.
Description
check and disabled when the check box is empty.
bandwidth, and country.
selected manually.
Chapter 5: 2.4GHz and 5GHz Radios
81
Advertisement
Table of Contents
