Table of Contents
Advertisement
TQ6000 GEN2 Access Points User's Guide
Viewing
IEEE802.11k
RRM Status
148
Table 28. Fast Roaming IEEE802.11r (Continued)
Field
Mobility Domain
Shows the domain name of the access point that
provides Fast Roaming. Here are the guidelines:
- The name consists of 4 alphanumeric characters.
- The key is not case-sensitive.
- The default value is a1b2.
PMK-R0
Shows the RMK-R0 lifetime in minutes. The range is
Lifetime
1 to 65535. The default value is 1000.
AES Key
Shows the AES key. Here are the guidelines:
- The key consists of 32 alphanumeric characters.
- The key is not case-sensitive.
- The default value is none.
To view whether Fast Roaming IEEE802.11k is enabled or disabled,
perform the following procedure:
Note
You cannot enable or disable Fast Roaming on the access point.
Enabling or disabling requires Vista Manager EX and AWC.
1. Select Settings > VAP / Security from the main menu.
2. Select Radio1 or Radio2 from the sub-menu. The default is Radio1.
3. Select a VAP from the next sub-menu. The default is VAP0.
4. Select the Fast Roaming tab. See Figure 52 on page 147.
5. View the status of IEEE802.11k.
The options are:
Enabled: IEEE802.11k Radio Resource Measurement (RRM) is
enabled.
Disabled: IEEE802.11k Radio Resource Measurement (RRM) is
disabled.
Description
Advertisement
Table of Contents
