Table of Contents
Advertisement
TQ6702e GEN2 Outdoor Access Point Installation Guide
Features of the TQ6702e GEN2 Access Point
20
The TQ6702e GEN2 Wireless Access Point is a dual-radio access point
with 4x4 (2.4GHz) and 8x8 (5GHz) Wi-Fi 6 wireless connectivity. This
access point is suitable for both indoor and outdoor environments. With
the PoE++ LAN port, the access point can be connected to your wired
network and powered from a PoE++ power source device.
Basic hardware features include:
One 2.4GHz radio
One 5GHz radio
Four 2.4G/5GHz dual-band antennas
Four 5GHz external antennas
One 100M/1000M/2.5G/5G Base-T Ethernet LAN port
Power over Ethernet (PoE++) on the LAN port
One Reset button for restoring the default settings
LEDs for LAN, WLAN, and power
Pole or wall installation
External antenna surge protectors
N-type antenna connectors for replacing antennas
Aluminum chassis to repel ultraviolet (UV) radiation and withstand
high temperature (IP66/IP67 protection rating)
Basic features of the 2.4G and 5GHz radios include:
IEEE 802.11a/b/g/n/ac/ax
Channel blankets
Multi-channel, single channel, and hybrid operation
Automatic channel selection
Band steering
WiFi multimedia (WMM) for prioritizing traffic
Basic features of the Ethernet LAN port include:
100Mbps (IEEE 802.3u), 1000Mbps (IEEE 802.3ab), 2.5Gbps, and
5Gbps (IEEE 802.3bz)
PoE++ (IEEE 802.3bt)
Flow control (IEEE 802.3x)
VLAN tagging (IEEE 802.1Q)
Advertisement
Table of Contents
