Leds; Table 3. Leds On The At-Ap500 Access Point - Allied Telesis AT-AP500 Installation Manual

LEDs

Draft 11-11-2016
The LEDs on the AT-AP500 Access Point are described in Table 3.

Table 3. LEDs on the AT-AP500 Access Point

LED State
PWR Solid Green
Off
SYS Solid Amber The access point is loading its firmware or
Off
LAN Solid Green
Flashing
Green
Solid Amber The Ethernet port is operating at 10/100
Flashing
Amber
2.4GHz Solid Green
5GHz Solid Green
AT-AP500 Wireless Access Point Installation Guide
Description
The unit is receiving DC power that is
within the normal operating range.
The power supply is not receiving power
from either the AC/DC power adapter or a
PoE+ Ethernet switch.
there is a system fault.
The unit is operating normally.
The Ethernet port is operating at 1000
Mbps.
The Ethernet port is operating at 1000
Mbps with link activity.
Mbps.
The Ethernet port is operating at 10/100
Mbps with link activity.
The 2.4GHz radio is sending and receiving
radio waves.
The 5GHz radio is sending and receiving
radio waves.
17