As Needed Maintenance; Upgrading Software Or Entering A System Code - Stratasys FORTUS 360mc Manual

As Needed Maintenance

Upgrading Software or Entering a System Code

Upgrades to controller software and system codes are uploaded to the
system.
Note: To upgrade system controller software, or to enter a
system change code, access to an Insight workstation is
required.
An Insight workstation with internet access will check for
controller software upgrades, notify you of upgrade
availability, and walk you through the procedure to download
the upgrade to the Insight workstation.
System change codes are obtained from your Stratasys
Representative.
1.
Verify that the system is idle.
2.
Place the system in the Receive Software Upgrade or Code mode.
A.
From the Main Menu select
Build Job..
Operator Control..
Modeler Status..
>Maintenance..
B.
Select
Modeler Default..
>Administration..
Reboot system..
C.
Select
The system is now ready to receive the new software upgrade or
code from the Insight workstation.
Network Configuration..
>Receive Software Upgrade or Code..<E>
Field Service..
>Waiting for Software Upgrade or Code
Press MENU key to Cancel
3.
From the Insight workstation:
7-10
FORTUS 360mc/400mc and FDM 360mc/400mc User Guide
Administration
Receive Software Upgrade or Code
password:
Maintenance
| *Tips: Model T16
| * Support T16
and press ENTER.
and press ENTER.
and press ENTER.