FORTUS 360mc/400mc and FDM 360mc/400mc User Guide
Part Build Parameters
The second step in preprocessing a model is to choose the part build
parameters. The part build style will determine the type of fill pattern used to
build the part. The part interior style will determine whether the interior of
the part is solid or not. The support style will determine the type of supports.
(Figure
5-3)
1.
Select a part fill style.
• Typically you will use the perimeter/rasters selection.
2.
Select a part interior style.
• Solid - normal: will be stronger.
• Sparse: will build faster and use less material.
• Sparse - double dense: will build with twice the material for a
stronger part.
3.
Select the Visible surfaces.
• Fine rasters may improve surface finish while reducing build time
on some geometries.
4.
Select a Support style.
Figure 5-3: Modeler Setup
FDM 400mc Large
ABS-M30
SR20
Basic
5-3