Modeler Setup - Insight; Configure Your Modeler - Stratasys FORTUS 360mc Manual

Modeler Setup - Insight

Configure Your Modeler

The first step in preprocessing is to configure your modeler.
1.
Click the Modeler button
(right side of screen) of the Operations Panel. The Configure Modeler
dialog box opens. You can also access the Modeler Setup window by
selecting Modelers>Setup.
Options
Icon
Save Settings
2.
Select your modeler from the Modeler Field.
3.
Select a modeling material (the Support Material field is automatically
filled). See
4.
Select a model tip size (the Support Tip field and the Slice Height field
is automatically filled in).
5-2
FORTUS 360mc/400mc and FDM 360mc/400mc User Guide
(Figure
Figure 5-2: Configure the Modeler
"Liquefier Tips" on page 3-8
located in the Modeler Setup window
5-2)
FDM 400mc Large
for modeler/tip compatibility.
Cancel
Changes