Head Maintenance Bracket - Stratasys FORTUS 360mc Manual

Head Maintenance Bracket

The 360mc/400mc is equipped with a Head Maintenance Bracket which
places the head in a convenient location for many head maintenance tasks. To
place the head in the bracket:
1.
Place system in Pause or Idle state.
2.
Move the head to the Service Location (
Head/Stage > Move Head To Service Location
3.
Open the Top Door and Hood (
4.
Loosen the two head mounting plate retaining screws.
Note: The retaining screws are 'captured'. They should not be
unscrewed from the head.
5.
Place the head into the head maintenance bracket and secure the head
with the head mounting plate retaining screws.
Note: When the head is in the maintenance bracket, clean out
the head tray
Figure 3-6: Location of Head Maintenance Bracket
Head
Moved to
Service
Location
3-6
FORTUS 360mc/400mc and FDM 360mc/400mc User Guide
(Figure 3-5 &
Operator Control > Unlock Door
(Figure 3-7).
Figure 3-7: Head Tray
Figure 3-6).
Operator Control > Move
)
Head Tray
).
Head
Maintenance
Bracket