Select A Job To Build - Stratasys FORTUS 360mc Manual

FORTUS 360mc/400mc and FDM 360mc/400mc User Guide

Select a Job to Build

1.
From the Main Menu select
>Build Job..
Operator Control..
Modeler Status..
Maintenance..
2.
Select one of job build options:
>Build Next Job:
Build Last Job:
Show Job Queue..
Show Sample Job Queue..
A.
Build Next Job
• Selects the first job in the job queue for build.
B.
Build Last Job
• The previous job built by the system will be selected for build.
• If a previous job does not exist, the screen will show
Previous Job
C.
Show Job Queue
• The job queue is displayed.
• Position the cursor in front of a specific job in the queue.
• Press ENTER to select the job for build.
• For more information on the job queue, see
Job Queues" on
D.
Show Sample Job Queue
• The sample job queue is displayed.
• Position the cursor in front of a specific job in the sample job
queue.
• Press ENTER to select the job for build.
• For more information on the sample job queue, see
with the Job Queues" on
3.
If
User Placement on Platen
build will initiate (an Auto Z Stage Zero may be performed depending
upon modeler status or settings).
Build Job
|*Tips: Model T16
|*
motor housing <E>
rotor <E>
- builds the last job completed.
.
page 4-29.
page 4-29.
is set to
and press ENTER.
Support T16
(6 Jobs)
"Working with the
(system default), the part
NO
No
"Working
4-7