Top Door And Top Hood; Oven Door; Canister Bay Doors; Right Side Door - Upper - Stratasys FORTUS 360mc Manual

FORTUS 360mc/400mc and FDM 360mc/400mc User Guide
Top Door

Top Door and Top Hood

Allows access to the XY Gantry, head assembly, and four cooling fans. The
cooling fans cool the upper area of the XY Gantry and head area. The two fans
on the left draw cool air into the system. The two fans on the right draw warm
air out of the system.

Oven Door

Allows access to the platen, tip wipe assembly, and modeled parts.

Canister Bay Doors

Allows access to the material canisters, purge waste bucket, storage area,
vacuum gauge, pressure gauge, canister levers, and canister LEDs.
Warning: Turn power Off and disconnect the power cable
before removing any of the access panels.
Warning: High voltage is present in the system when the
system is Off and the power cord is unplugged. This is due to
the Uninterruptible Power Supply (UPS). Make sure you
follow the correct shutdown procedure. See
the System" on

Right Side Door - Upper

Allows access to the right side Z stage components. To remove the panel,
loosen the four panel retaining screws (the screws do not have to be
removed).

Right Side Door - Lower

Allows access to some of the electronic bay components such as the computer
case, CD-ROM, in-line vacuum filter, keyboard, monitor connectors, and the
vacuum system. To remove the panel, loosen the four panel retaining screws
(the screws do not have to be removed).
Figure 3-3: Top Door and Top Hood
page 4-4.
Top Hood
"Powering Down
3-3