Sending A Part To The Modeler - Stratasys FORTUS 360mc Manual

FORTUS 360mc/400mc and FDM 360mc/400mc User Guide

Sending a Part to the Modeler

The process of sending a part to a modeler is dependent upon the associated
FDM application that you have purchased (FDM Control Center).
Note: FDM Control Center is an application that works with
the Insight software to create packs and send part build
commands.
Note: For detailed information about using FDM Control
Center use the associated Help file within the application.
1.
For FDM Control Center:
A.
Click the Build button from the Insight application.
• If FDM Control Center is not open, it is automatically started.
• The part is placed in the Pack View of the FDM Control Center
application.
B.
Click the Build Job button to send the job to the modeler queue.
5-7