Waterworks; About Waterworks Soluble Concentrate; Service And Support - Stratasys FORTUS 360mc Manual

FORTUS 360mc/400mc and FDM 360mc/400mc User Guide
About WaterWorks Soluble
Concentrate
™

WaterWorks

in combination with Stratasys' soluble support materials
dissolves temporary support structures with a water based solution, rather
than manually removing support material or using solvents to clean parts.
Stratasys software automatically
creates any needed support structures
to build specific parts. When
applicable, WaterWorks provides the
final step allowing the building of
complex geometries and fully
functional assemblies in a single build.
Soluble support materials are dissolved
in a water based solution resulting in a
part with a smooth surface finish and
fine details intact.
Some parts have support materials that
are hard to remove (e.g., parts with
thin, deep channels) that result in longer dissolving times. Some parts have
support material that cannot be removed (e.g., hollow parts with non-
accessible interiors).

Service and Support

If there are questions regarding WaterWorks, the steps in this user guide, or
MSDS, contact Stratasys Customer Support:
• Service: 800.801.6491 (7:00 a.m. to 5:00 p.m. C.T.)
• Email: support@stratasys.com
Appendix C
WaterWorks
C-1