Absi (P500 - Stratasys FORTUS 360mc Manual

FORTUS 360mc/400mc and FDM 360mc/400mc User Guide
Use ABS-M30 model material with and SR-30 support material. The following
tip combinations and slice heights are available:
Fortus eV, eT, 360mc/400mc, &
900mc
ABS-M30
Model Tip Support Tip
T10 T12 SR/
T12SR30
T12 T12 SR/
T12SR30
T16 T12 SR/
T12SR30
T20 T12 SR/
T12SR30

ABSi (P500)

ABSi material is only available on Titan, Vantage Xa, Vantage S, Vantage SE,
FDM Maxum, Fortus eV, Fortus eT, Fortus 360mc/400mc and Fortus 900mc
systems.
Use ABSi model material with ABS_SS support material. The following tip
combinations and slice heights are available:
FDM Titan, Vantage Xa, Vantage
Xp, Vantage SE, and Vantage S
ABSi
Model Tip Support Tip Slice Height
T10 T12 WW
T12 T12 WW
T16 T12 WW
T20 T20
Fortus eV, eT, 360mc/400mc, &
900mc
ABS-M30i
Slice Height Model Tip
0.005 in. T10
(0.127 mm)
0.007 in. T12
(0.178 mm)
0.010 in. T16
(0.254 mm)
0.013 in. T20
(0.330 mm)
** T10 Slice is not available for Fortus 900mc.
Fortus eT, Fortus 400mc, Fortus 900mc
and FDM Maxum
ABSi
Model Tip
0.005 in. T10
(0.127 mm)
0.007 in. T12
(0.178 mm)
0.010 in. T16
(0.254 mm)
0.013 in. * T10 Slice is not available for Fortus 900mc.
(0.330 mm)
Support Tip Slice Height
T12 SR20/ 0.005 in. **
T12SR30 (0.127 mm)
T12 SR20/ 0.007 in.
T12SR30 (0.178 mm)
T12 SR20/ 0.010 in.
T12SR30 (0.254 mm)
T12 SR20/ 0.013 in.
T12SR30 (0.330 mm)
Support Slice Height
Tip
T10 0.005 in.
(0.127 mm)
T12 0.007 in.
(0.178 mm)
T16 0.010 in.
(0.254 mm)
C-3