Additional Settings - Wilo Yonos GIGA2.0-I Installation And Operating Instructions Manual

13.4 Key lock
14

Additional settings

Installation and operating instructions Wilo-Yonos GIGA2.0-I/-D
Additional settings
Universal Display text
1.0 Settings
1.5 Display settings
1.5.3 Units
m, m³/h m, m
kPa, m³/h kPa, m
kPa, l/s kPa, l/s
ft, USGPM ft, USGPM
Selection options of units:
Units
3
m, m /h
3
kPa, m /h
kPa, l/s
ft, USGPM
Table 31: Units
NOTICE
The units are factory set to m, m
The key lock function prevents accidental change of pump parameters by unauthorised
persons.
The key lock can be activated under
Universal Display text
1.0 Settings
1.5 Display settings
1.5.4 Key lock
1.5.4.1 Key lock ON
Simultaneously pressing (> 5 seconds) the "Back"
deactivates the key lock.
When the key lock is activated, the Home screen and warning and error messages are
still displayed in order to monitor the pump status.
The active key lock can be identified in the Home screen by a lock symbol
General settings can be changed under
The following table gives an overview of the "Additional settings" menu:
Universal Display text
1.0 Settings
1.6 Additional settings
1.6.1 Pump kick
1.6.1.1 Pump kick: ON/OFF
3
/h
3
/h
Description
Representation of physical values in SI
units.
Exception:
• Volume flow in m
• Delivery head in m
Display of the delivery head in kPa and the
volume flow in m
Representation of delivery head in kPa
and volume flow in l/s
Representation of physical values in US
units
3
/h.
"Settings", "Display settings".
button and the operating button
"Settings", "Additional settings".
en
3
/ h
3
/ h
.
183