Factory Settings; Disposal; Oils And Lubricants; Water-Glycol Mixture - Wilo Yonos GIGA-N 80 Installation And Operating Instructions Manual

Table of Contents

Advertisement

13

Factory settings

14

Disposal

14.1

Oils and lubricants

14.2

Water-glycol mixture

14.3

Protective clothing

14.4
Information on the collection of
used electrical and electronic
products
Installation and operating instructions Wilo-Yonos GIGA-N
Factory settings
Menu no.
1.0.0.0
2.0.0.0
2.3.3.0
4.3.1.0
5.1.1.0
5.1.3.2
5.1.3.3
5.1.4.0
5.1.5.0
5.1.6.0
5.1.7.0
5.3.2.0
5.4.1.0
5.4.2.0
5.5.0.0
5.6.1.0
5.6.2.0
5.6.3.0
5.7.1.0
5.7.2.0
5.7.6.0
5.8.1.1
5.8.1.2
5.8.1.3
Table 33: Factory settings
Operating fluid must be collected in suitable tanks and disposed of in accordance with
the locally applicable guidelines (e.g. 2008/98/EC).
The operating fluid complies with Water Hazard Class 1 of the German Administrative
Regulation of Substances Hazardous to Water (VwVwS). When disposing of it, the loc-
ally applicable guidelines (e.g. DIN 52900 on propanediol and propylene glycol) must be
observed.
Used protective clothing must be disposed of in accordance with the locally applicable
guidelines (e.g. 2008/98/EC).
Proper disposal and appropriate recycling of this product prevents damage to the envi-
ronment and putting your personal health at risk.
Designation
Setpoints
Control mode
Pump
Base-load pump
Operating mode
Internal/external pump re-
placement
Pump cycling time interval
Pump enabled/disabled
SSM
SBM
External off
In1 (value range)
In2 active/inactive
In2 (value range)
PID parameter
HV/AC
Emergency operation
speed
Auto reset time
Display orientation
Pressure value correction
SBM function
Pump kick active/inactive
Pump kick interval
Pump kick speed
en
Factory-configured val-
ues
ƒ
Constant speed: approx.
60 % of n
pump
max
ƒ
Δp-c: approx. 50 % of
H
pump
max
ƒ
Δp-v: approx. 50 % of
H
pump
max
Δp-c activated
ON
MA
Main/standby operation
internal
24 h
Approved
Collective fault signal
Collective run signal
Collective External off
0-10 V active
OFF
0-10 V
See "Setting the control
mode" chapter
HV
approx. 60 % of n
pump
max
300 sec
Display on original orienta-
tion
active
SBM: Run signal
ON
24 h
n
min
77

Advertisement

Table of Contents
loading

Table of Contents