Wilo Yonos GIGA2.0-I Installation And Operating Instructions Manual page 148

en
9.4.3 Initial settings menu
Language
EN
DE
FR
Fig. 30: Initial settings menu
Language
UNIV
FI
SV
Fig. 31: Menu language
148
Commissioning
Control settings
Control mode
Setpoint Δp-v
Emergency operation
ƒ
Turn : menu selection and parameter setting.
ƒ
Press : Activation of menus or confirming settings.
Press the "Back" button
change the focus back to the previous focus. Consequently, the focus moves one level
further up in the structure or to a previous setting.
Pressing the Back button
confirming the changed value returns the focus to the previous focus. The adjusted
value will be discarded. The previous value remains unchanged.
If the Back button is pressed for more than 2 seconds, the Home screen opens and
the pump can be operated from the main menu.
NOTICE
If there are no warning or error messages, the display on the electronic module will
switch off 2 minutes after the last time it was operated.
• If the operating button is pressed or turned again within 7 minutes, the previously
exited menu will appear. You can continue to configure settings.
• If the operating button is not pressed or turned for more than 7 minutes, any un-
confirmed settings will be lost. Pressing the button again opens the Home screen on
the display and the pump can be operated from the main menu.
The settings menu will appear in the display during initial commissioning of the pump.
Turn the operating button to display the different menu languages. The following lan-
guages can be selected:
Language abbreviations
EN
DE
FR
IT
ES
UNIV
FI
SV
PT
NO
NL
DA
PL
HU
CS
RO
SL
HR
Δp-v
Δp-c
n-c
("Description of operating elements" [} 147] table) to
after having changed a setting (yellow focus) without
Language
English
German
French
Italian
Spanish
Universal
Finnish
Swedish
Portuguese
Norwegian
Dutch
Danish
Polish
Hungarian
Czech
Romanian
Slovenian
Croatian
Control mode
WILO SE 2022-05