Installing/Dismantling; Maintenance Tasks; Operator Responsibilities - Wilo Yonos GIGA2.0-I Installation And Operating Instructions Manual

2.5

Installing/dismantling

2.6

Maintenance tasks

2.7

Operator responsibilities

Installation and operating instructions Wilo-Yonos GIGA2.0-I/-D
Safety
ƒ
Wear protective equipment:
–
Safety shoes
–
Safety gloves for protection against cuts
–
Safety helmet (when using lifting equipment)
ƒ
Locally applicable laws and regulations on work safety and accident prevention
must be complied with.
ƒ
The procedure described in the installation and operating instructions for shutting
down the product/unit must be strictly observed.
ƒ
Disconnect the device from the mains and secure it against being switched on
again without authorisation.
ƒ
All rotating parts must be at a standstill.
ƒ
Close the gate valve in the inlet and in the pressure pipe.
ƒ
Provide adequate aeration in enclosed spaces.
ƒ
Make sure that there is no risk of explosion when carrying out any type of welding
work or work with electrical devices.
ƒ
Wear protective equipment:
–
Sealed safety goggles
–
Safety shoes
–
Safety gloves for protection against cuts
ƒ
Locally applicable laws and regulations on work safety and accident prevention
must be complied with.
ƒ
The procedure described in the installation and operating instructions for shutting
down the product/unit must be strictly observed.
ƒ
Only perform the maintenance work described in these installation and operating
instructions.
ƒ
Only original parts from the manufacturer may be used for maintenance and re-
pairs. The use of any non-original parts releases the manufacturer from any liabil-
ity.
ƒ
Disconnect the device from the mains and secure it against being switched on
again without authorisation.
ƒ
All rotating parts must be at a standstill.
ƒ
Close the gate valve in the inlet and in the pressure pipe.
ƒ
Collect any leakage of fluid and operating fluid immediately and dispose of it ac-
cording to the locally applicable guidelines.
ƒ
Store tools at the designated locations.
ƒ
After completing work, reattach all safety and monitoring devices and check that
they function properly.
ƒ
Provide installation and operating instructions in a language which the personnel
can understand.
ƒ
Make sure that personnel are suitably trained for the specified work.
ƒ
Verify the area of responsibility and individual responsibilities of personnel.
ƒ
Provide the necessary protective equipment and make sure that personnel wear it.
ƒ
Ensure that safety and information signs mounted on the device are always legible.
ƒ
Train personnel with regard to the operating principles of the system.
ƒ
Eliminate risks from electrical current.
ƒ
Equip hazardous components (extremely cold, extremely hot, rotating, etc.) with a
guard to be provided by the customer.
ƒ
Remove leakages of hazardous fluids (e.g. explosive, toxic or hot) in such a way
that no danger is posed to persons or the environment. Comply with national stat-
utory provisions.
ƒ
Keep highly flammable materials at a safe distance from the product.
ƒ
Ensure compliance with the regulations for accident prevention.
ƒ
Ensure compliance with local directives or general directives [e.g. IEC, VDE, etc.]
and instructions from local energy supply companies.
Follow all information that appears on the product and ensure that it remains perman-
ently legible:
ƒ
Warnings
ƒ
Rating plate
ƒ
Direction of rotation arrow/symbol for direction of flow
ƒ
Identification of connections
This device can be used by children from 8 years of age as well as people with reduced
physical, sensory or mental capacities or lack of experience and knowledge if they are
supervised or instructed on the safe use of the device and they understand the dangers
en
113