Wilo Yonos GIGA2.0-I Installation And Operating Instructions Manual page 186

en
Diagnostics help
Device information
Service information
Overview of relay
output (SSM/SBM)
Fig. 87: Diagnostics help menu
186
Diagnostics and measured values
Universal Display text
Current status:Not en- Current status: Not energized
ergized
2.1.4 Overview of analogue input (AI1)
Type of use: Type of use:
Not used Not used
Differential pressure Differential pressure sensor
sensor
External sensor External sensor
Setpoint input Setpoint input
Signal type: Signal type:
Current value: : Current value:
2.1.5 Overview of analogue input (AI1)
Type of use: Type of use:
Not used Not used
External sensor External sensor
Setpoint input Setpoint input
Signal type: Signal type:
Current value: : Current value:
2.1.6 Twin-head pump
connection info
Partner paired and Partner paired and reachable.
reachable.
Partner is paired. Partner is paired.
Partner is not reachable. Partner is not reachable.
1
Partner WCID: Partner WCID:
Partner Address: Partner address:
Partner Name: Partner name:
2.1.7 Pump cycling status
Time-based pump cyc- Time-based pump cycling
ling:
Switched ON, interval: Switched on, interval:
Switched OFF Switched off
Current status: Current status:
No pump is running. No pump is running.
Both pumps are running. Both pumps are running.
This pump is running. This pump is running.
Other pump is running. Other pump is running.
Next execution in: Next execution in:
2.2 Measured values
2.2.1 Operating data
H act = H is =
n act = n is =
P electr = P electr =
U mains = U mains =
2.2.2 Statistical data
W electr = W electr =
Operating hours = Operating hours =
1
WILO SE 2022-05