Overview Of The Pump Cycling Status; Measured Values - Wilo Yonos GIGA2.0-I Installation And Operating Instructions Manual

Twin-head pump
connection info
Partner paired and reachable
Partner WCID: BOCO154
Partner address: 2
Partner name:
Fig. 92: Information on the twin-head pump
connection
15.7 Overview of the pump cycling
status
Pump cycling status
Time-based pump cycling:
Switched on Interval: 24 h
Current status:
This pump is running
Next execution in: 23h 56m
Fig. 93: Information on the pump cycling status
15.8

Measured values

Installation and operating instructions Wilo-Yonos GIGA2.0-I/-D
Diagnostics and measured values
Universal Display text
2.0 Diagnostics and measured values
2.1 Diagnostics help
2.1.6 Twin-head pump
connection info
Partner paired and Partner paired and reachable.
reachable.
Partner is paired. Partner is paired.
Partner is not reachable. Partner is not reachable.
1
Partner WCID: Partner WCID:
Partner Address: Partner address:
Partner Name: Partner name:
1
WICD = Wilo Communication ID (Communication address of the twin-head pump
partner)
NOTICE
The twin-head pump connection overview is only available if a twin-head pump
connection has been previously configured (see "Dual pump management" [} 159]
section).
You can read the status information on the pump cycling in the menu
and measured values". To do this, select the following:
Universal Display text
2.0 Diagnostics and measured values
2.1 Diagnostics help
2.1.7 Pump cycling status
Time-based pump cyc- Time-based pump cycling
ling:
Switched ON, interval: Switched on, interval
Switched OFF Switched off
Current status: Current status:
No pump is running. No pump is running.
Both pumps are running. Both pumps are running.
This pump is running. This pump is running.
Other pump is running. Other pump is running.
Next execution in: Next execution in:
ƒ
Pump cycling switched on: yes/no
The following additional information is available when pump cycling is switched on:
ƒ
Current status: No pump running / both pumps running / main pump running /
pump partner running.
ƒ
Time until next pump cycling
You can read operating data, measured values and statistical values in the menu
"Diagnosis and measured values". To do this, select the following in succession:
1
en
"Diagnosis
189