Wilo Yonos GIGA2.0-I Installation And Operating Instructions Manual page 153

Fig. 36: Settings menu
9.4.9 Settings dialogues
Control mode
Δp-v
Δp-c
n-c
Fig. 37: Settings dialogue
Installation and operating instructions Wilo-Yonos GIGA2.0-I/-D
Commissioning
1
An arrow above or below a menu area indicates that additional submenu items are
available in this area. These submenu items are accessed by turning
ing button.
2
An arrow ˜˜˜˜˜ to the right in a submenu item indicates that another submenu is
accessible. Pressing the operating button opens this submenu.
If there is no arrow pointing to the right, a settings dialogue can be accessed by press-
ing the operating button.
NOTICE
Briefly press the Back button
Briefly press the Back button
there is an error, pressing the Back button
"Error messages" [} 192]).
If there is an error, holding down the Back button
the Home screen or to the error display from any settings dialogue and from any
menu level.
Settings dialogues have been highlighted with a yellow frame and show the current
setting.
Turn the operating button to the right or left to adjust the highlighted setting.
Press the operating button to confirm the new setting. The focus returns to the menu
you opened.
If you do not turn the operating button before pressing, the previous setting remains
unchanged.
One or more parameters can be set in the settings dialogues.
ƒ
If only one parameter can be set, the focus returns to the menu you opened after
having confirmed the parameter value (pressing the operating button).
ƒ
If several parameters can be set, the focus changes to the next parameter after
having confirmed a parameter value.
If you confirm the last parameter in the settings dialogue, the focus returns to the
menu you opened.
Press the "Back" button
previously changed value will be discarded because it had not been confirmed.
Press the operating button to check set parameters and switch between them. In
this process, existing parameters are once again confirmed, but not changed.
NOTICE
Press the operating button without selecting another parameter or adjusting an-
other value to confirm the setting.
Press the Back button to discard the current adjustment and retain the previous
setting. The menu changes to the previous setting or previous menu.
in a submenu to return to the previous menu.
in the main menu to return to the Home screen. If
takes you to the error display (Section
(> 1 second) takes you back to
to return the focus to the previous parameter. The
en
the operat-
153