Fitting A Borosilicate Glass Capillary (Nanovial) - Waters Xevo TQD Operator's, Overview And Maintenance Manual

9. Connect the high-voltage cable to the instrument's HV connection.
High-voltage cable
10. Slide closed the instrument's source interface door.

Fitting a borosilicate glass capillary (nanovial)

Required materials
• Chemical-resistant, powder-free gloves
• Needle-nose pliers
• Borosilicate glass capillary
• Fused silica syringe needle or GELoader
• Fused silica cutter
The NanoFlow stage contains a high-voltage interlock, so
Caution:
the capillary voltage (the voltage applied to the sprayer assembly)
and the sampling cone voltage remain disabled until the sprayer is
pushed fully forward in the source.
®
tip
NanoFlow source 3-19