Group 15 Monitoring System - Hyundai HX130LCR Manual

GROUP 15 MONITORING SYSTEM

1. STRUCTURE
The cluster consists of LCD and switches as shown below. The LCD is to warn the operator in case
of abnormal machine operation or conditions for the appropriate operation and inspection.
Also, The LCD is to set and display for modes, monitoring and utilities with the switches.
The switches or touch screen are to set the machine operation modes.
The cluster installed on this machine does not entirely guarantee the condition of the machine.
※
Daily inspection should be performed according to chapter 6, Maintenance.
When the cluster provides a warning immediately check the problem, and perform the required
※
action.
The warning lamp pops up and/or blinks and the buzzer sounds when the machine has a
※
problem.
The warning lamp lights up or blinks until the problem is cleared. Refer to page 5-60 for
details.
This cluster is adjustable.
※
· Vertical (forward/backward) : each 15°
· Horizontal (left only) : 8°
Time display
Left
5-55
Warning lamps
(see page 5-63)
Gauge(see page 5-61)
Main menu(see page 5-78)
Tripmeter
(see page 5-91) 88
Pilot lamps
(see page 5-71) 68
Switches
(see page 5-74) 71
Forward
Backward
290F3CD47
0
)
58
)
75
)
)
)
)
130ZF5MS102