Hyundai HX130LCR Manual page 562

Hide thumbs Also See for HX130LCR:

Table of Contents

Procedures are based on the type M1.

Clean pilot valve with kerosene.

Put blind plugs into all ports

Fix pilot valve in a vise with copper (or

lead) sheets.

Remove end of boot (23) from case (1)

and take it out upwards.

For valve with switch, remove cord also

through hole of casing.

Loosen lock nut (22) and adjusting nut

(17) with spanners on them respectively,

and take out handle section as one body.

Remove the boot (14).

Troubleshooting