(7)
Assemble ball guide (10) in cylinder block.
Take care not to damage sliding surface of
※
cylinder block.
(8)
Insert piston assembly (12) in retainer plate (11).
Do not mix piston with other piston (9EA/1set).
※
Spread sufficient amount of hydraulic oil on
※
piston assembly.
(9)
Place all 9 pistons simultaneously into the holes
of cylinder block.
Take care not to damage sliding surface.
※
(10)
Lay casing down horizontally and put cylinder
block assembly in casing.
Check whether cylinder block assembly rotates
※
smoothly.
8-55
125LCR8SM29
125LCR8SM30
125LCR8SM31
125LCR8SM32