3)
DISASSEMBLY
(1)
Disassembly of spools without holding valve (travel right, travel left)
Loosen hexagon socket head bolts with washer.
①
(hexagon wrench : 5 mm)
Remove the pilot cover.
②
Pay attention not to lose the O-ring under the pilot cover.
※
Remove the spool assembly from the body by hand slightly.
③
When extracting each spool from its body, pay attention not to damage the body.
※
When extracting each spool assembly, it must be extracted from spring side only.
※
When any abnormal parts are found, replace it with completely new spool assembly.
※
When disassembled, tag the components for identification so that they can be reassembled
※
correctly.
Return spring
O-ring
8-38
Pilot cover
Socket head bolt
14098MC10