(13)
Lay casing down horizontally and remove
cylinder block assembly from shaft.
And remove all friction plate (13) and separator
plate (14).
(14)
Separate piston assembly (12), ball guide (10),
retainer plate (11) and cylinder spring (9).
(15)
Remove O-ring (19) from casing.
(16)
Use a magnet to separate swash plate (7) from
casing.
Sliding surface should be carefully treated to
※
avoid scratches and damage.
8-51
125LCR8SM17
125LCR8SM18
125LCR8SM19
125LCR8SM20