(13)
When assembling the needle bearing (21),
insert the needle bearing (21) into rear
cover (20) by hammering.
(14)
Reassemble valve plate (23) to the rear
cover (20) and reassemble O-ring (18).
(15)
Connect the rear cover (20) with the body
(1) and tighten the wrench bolt (24).
(16)
Insert check (29) and spring (28) in the
valve casing and install O-ring (27) and
back up ring (26). Tighten plug (25) to the
rear cover (20).
8-88
32038SM36
32038SM37
32038SM38
32038SM39