(11)
Attach the PTO unit (05) by fastening the
flange socket (435) to the valve block
(312).
(12)
In case the pump is not provided with the
PTO unit (05), attach the cover (262) with
the hexagon socket head cap screw
(414).
(13)
Putting feedback lever (611) of regulator
into feedback pin (548) of tilting pin (531),
fit regulator with hexagon socket head
bolt (415).
Take care not to mix up regulator of front
※
pump and that of rear pump.
(14)
Fit drain port plug (468).
T h i s i s t h e e n d o f r e a s s e m bl i n g
procedures.
8-20
140Z98MP32
140Z98MP33
140Z98MP34