Hyundai HX130LCR Manual page 522

(8) Disassembling carrier 2 assembly (8).
① Using M8 solid drill, crush spring pin (22)
so that the pin 2 (12) can be removed.
※ Do not reuse spring pin (22).
② Remove pin 2 (12), planet gear 2 (10) and
thrust washer (21) from the carrier 2 (9).
Put matching marks on the planet gear 2
※
(10) and the pin 2 (22) for easy reassembly.
Do not disassemble pin 2 (12), carrier 2
※
(9) and spring pin (22) but in case of
replacement.
(9) Tighten two M16 eyebolt to the ring gear
(27) and then lift the ring gear (27) out of
casing (1).
(10) Remove stop ring (25) from the drive
shaft (2).
(11) Remove drive shaft (2) with roller bearing
(6) and oil seal (7) assembled.
Remove knock pin (28) from the casing
(1).
9
28
8-94
12
10
21
22
130ZF8sm12
27
1
130ZF8sm13
25
2
130ZF8sm14
2
6
7
1
130ZF8sm15