4. IDLER AND RECOIL SPRING
REMOVAL
1)
Remove the track link.
(1)
For detail, see removal of track link.
Sling the recoil spring (1) and pull out idler
(2)
and recoil spring assembly from track
frame, using a pry.
·Weight : 215 kg (474 lb)
Remove the bolts (2), washers (3) and
(3)
separate ilder from recoil spring.
·Tightening torque : 29.7±3.0 kgf·m
2)
INSTALL
Carry out installation in the reverse order
(1)
to removal.
Make sure that the boss on the end face
※
of the recoil cylinder rod is in the hole of
the track frame.
(215±21.7 lbf·ft)
8-172
1
130ZF8UC10
130ZF8UC11
2
3
130ZF8UC12
130ZF8UC13