Hyundai HX130LCR Manual page 420

Hide thumbs Also See for HX130LCR:

Table of Contents

7. TURNING JOINT

Sliding surface with

sealing sections.

Sliding surface

between body and

stem other than

sealing section.

Sliding surface

with thrust plate.

Sliding surface

with thrust plate.

Maintenance standards

Plating worn or peeled due to seizure or contamination.

·Worn abnormality or damaged more than 0.1 mm

(0.0039 in) in depth due to seizure contamination.

·Damaged more than 0.1 mm (0.0039 in) in depth.

·Worn more than 0.5 mm (0.02 in) or abnormality.

·Worn less than 0.5 mm (0.02 in).

· D amage due to seizure or contamination remediable

within wear limit (0.5 mm) (0.02 in).

·Worn more than 0.5 mm (0.02 in) or abnormality.

·Worn less than 0.5 mm (0.02 in).

· D amage due to seizure or contamination remediable

within wear limit (0.5 mm) (0.02 in).

·Extruded excessively from seal groove square ring.

· S lipper ring 1.5 mm (0.059 in) narrower than seal

groove, or narrower than back ring.

·Worn more than 0.5 mm (0.02 in) ~ 1.5 mm (MAX.)

1.5mm (max.)

Smooth with oilstone.

Troubleshooting