Disassembly of the load check valve and the negative relief valve
(4)
The load check valve
①
a.
Fix the body to suitable work bench.
Pay attention not to damage the body.
※
b.
Loosen the plug (hexagon wrench : 10 mm).
c.
Remove the spring and the load check valve with pincers or magnet.
The negative relief valve
②
a.
Loosen the socket (spanner : 32 mm).
b.
Remove the spring, spring holder, piston and negative control poppet.
Plug
Spring
Load check valve
Coin type filter Spring holder
Negative
control
poppet
8-41
Piston
Spring
Socket
14W98MC13