Hyundai HX130LCR Manual page 554

11) After assembling nut ring (62) by using the jig,
disassemble the clamping.
Tightening torque : 60 kgf · m (434 lbf · ft)
※
12) Place lock plate (63) on the nut ring groove.
Select best position from one of 4 casing hole to
※
assemble lock plate.
13) Place lock plate th the direction which nut ring is
loosed and then assemble M10 bolt (89) with M8
screw (77) after spreading loctite #242. (Refer to
assembly detail drawing)
Tightening torque (M10) : 5.5 ± 0.6 kgf · m
※
Tightening torque (M8) : 2.7 ± 0.3 kgf · m
※
Make sure that M8 screw doesn't stick out of lock
※
plate.
Assembly detail drawing lock plate.
※
(39.8 ± 4.3 lbf · ft)
(19.5 ± 2.2 lbf · ft)
8-126
125LCR8TM100
125LCR8TM101
125LCR8TM102
125LCR8TM103