(10)
Assemble swash plate (16) to joint (15).
Screw it to position that it contacts with 4
※
push rods evenly.
Do not screw it over.
※
(11)
Assemble adjusting nut (17), apply
spanner to width across flat of plate (16)
to fix it, and tighten adjusting nut to the
specified torque.
During tightening, do not change position
※
of disk.
(12)
Fit boot (14) to plate.
8-142
36078RL25
36078RL26
1408DA61