Hyundai HX130LCR Manual page 526

(10) Assemble carrier 1 assembly (12) into the
ring gear (27).
(11) Hammer 4 knock pins (28) around the ring
gear (27).
(12) Assemble sun gear 1 (24) to the drive shaft
of the swing reduction gear.
(13) Apply loctite to the tapped holes of the ring
gear (27) and then mount swing motor onto
the ring gear (27).
Don't fail to coincide the gauge bar hole.
※
(14) Tighten socket bolts (30) around the swing
motor assembly.
·Tightening torque : 13.5 kgf·m (98 lbf·ft)
(15) Assemble plugs (31, 32) and level gauge
(38).
28
38
32
8-98
15
27
130ZF8sm20
24
130ZF8sm26
30
130ZF8sm06
31
32
130ZF8sm27