Table of Contents
Advertisement
(8)
Remove plate (12).
(9)
When return spring (7) is weak in force,
plug (8) stays in casing because of
sliding resistance of O-ring.
Take it out with minus screwdriver.
※
Take it out, utilizing external periphery
groove of plug and paying attention not to
damage it by partial loading.
During taking out, plug may jump up due
※
to return spring (7) force.
Pay attention to this.
(10)
Remove reducing valve subassembly
and return spring (7) out of casing.
Record relative position of reducing valve
※
subassembly and return springs.
(11)
Separate spool (3), spring seat (6), spring
(5) and shim (4) individually.
Pay attention not to damage spool
※
surface.
Record original position of spring seat (6).
※
Until being assembled, they should be
※
handled as one subassembly group.
8-136
36078RL05
36078RL06
36078RL07
36078RL10
Advertisement
Table of Contents
Troubleshooting
