Hyundai HX130LCR Manual page 552

Hide thumbs Also See for HX130LCR:

Table of Contents

Assemble planetary gear No.1 (72) of which

groove is faced downward. (3 places)

Assemble thrust plate No.1 (75).

After spreading loctite #242, assemble the M8 bolt

(76).(3 pcs)

Tightening torque : 2.7 ± 0.3 kgf · m

After the assembly, instantly check the noise and

interference by rotatong the gear.

First, place bearing (60) on the ring gear (59), then

put jig on it, then press it with press machine.

Troubleshooting