Table of Contents
Advertisement
(5)
After removing cover (C, 629) subassembly,
take out outer spring (625), inner spring
(626) and spring seat (C, 624) from
compensating section.
Then draw out adjusting ring (Q, 645),
pilot spring (646) and spring seat (644)
from pilot section.
Adjusting ring (Q,645) can easily be
※
drawn out with M4 bolt.
(6)
Remove hexagon socket head screws
(436, 438) and remove pilot cover (641).
After removing pilot cover, take out set
spring (655) from pilot section.
(7)
Remove snap ring (814) and take out
spring seat (653), return spring (654) and
sleeve (651).
Sleeve (651) is fitted with snap ring (836).
※
When removing snap ring (814), return
※
spring (654) may pop out.
Take care not to lose it.
(8)
Remove prevention plug (616) and take
out center plug (614) and adjusting plug
(615).
Center plug (614) and adjusting plug
※
(615) can easily be taken out with M6 bolt.
8-26
(210-7) REG03
(210-7) REG04
(210-7) REG05
(210-7) REG06
Advertisement
Table of Contents
Troubleshooting
