Method of the engine oil life reset
※
Once engine oil is changed, the oil life reset is required. To perform oil life reset, follow the
procedure as below.
(1) Turn the starting switch on without engine running.
(2) Then press "Menu" → "Manage" → "Engine Oil Life Reset"
(3) Press OK and Put "User Password".
(4) When the oil life reset is completed, the pop-up window below is seen, and oil pressure
warning lamp flashes at 1 Hz until starting switch cycle is reset.
(5) Turn the starting switch off and then starting switch on again to perform starting switch cycle
reset.
130ZF3CD101
130ZF3CD102
5-64