GROUP 16 MONITORING SYSTEM
GROUP 16 MONITORING SYSTEM
1. OUTLINE
1. OUTLINE
Monitoring system consists of the monitor part and switch part.
The monitor part gives warnings when any abnormality occurs in the machine and informs the
condition of the machine. Also, monitor part is to set and display for modes, monitoring and utilities
with the switches.
Various select switches are built into the monitor panel, which act as the control portion of the machine
control system.
2. CLUSTER
2. CLUSTER
1) 1)
MONITOR PANEL
MONITOR PANEL
※
The warning lamp pops up and/or blinks and the buzzer sounds when the machine has a
The warning lamp pops up and/or blinks and the buzzer sounds when the machine has a
problem.
problem.
The warning lamp lights up or blinks until the problem is cleared. Refer to page 5-65 for
The warning lamp lights up or blinks until the problem is cleared. Refer to page 5-65 for
details.
details.
※
This cluster is adjustable.
This cluster is adjustable.
· Vertical (forward/backward) : each 15°
· Horizontal (left only) : 8°
Time display
Left
5-59
Warning lamps
Warning lamps
(see page 3-6)
(see page 5-65)
Gauge(see page 5-62)
Gauge(see page 3-3)
Main menu(see page 3-19)
Main menu(see page 5-77)
Tripmeter
Tripmeter
(see page 5-90)
(see page 3-29)
Pilot lamps
Pilot lamps
(see page 5-70)
(see page 3-12)
Switches
Switches
(see page 3-15)
(see page 5-73)
Forward
Backward
290F3CD47
235F3CD05