(23)
After fixing drive shaft so that it does not fall,
and then turn it over, press taper bearing (4).
(24)
Assemble ring nut (5) by using the jig.
Tightening torque : 3.5±0.4 kgf · m
※
(25.3±2.9 lbf · ft)
(25)
Place lock plate (6) on the ring nut.
(26)
After spreading loctite #242, assemble the
bolt (7) (4 pcs).
Tightening torque : 2.5±0.25 kgf · m
※
(18.1±1.8 lbf · ft)
8-75
125LCR8SM106
125LCR8SM107
125LCR8SM108
125LCR8SM109