Hyundai HX130LCR Manual page 443

Hide thumbs Also See for HX130LCR:

Table of Contents

Remove hexagon socket head bolts (406)

and then seal cover (F, 261).

In the case removing it is difficult, and

hooking pull thin rod into notch, and the

cover can be removed easily.

Since oil seal is fitted on seal cover (F)

(261), take care not to damage it at

removing the cover.

Tapping shaft ends of drive shaft (111,

113) lightly with plastic hammer, remove it

from pump casing (271, 272).

Remove shoe plate (211) and swash

plate (212) from pump casing (271, 272).

Insert thin steel bar into the hole and

remove the lock pin (255) from pump

casing (271, 272).

When holding with thin steel bar, do not

confuse the unlocking hole with the arc

shaped oil passage.

Troubleshooting