Hyundai HX130LCR Manual page 538

Hide thumbs Also See for HX130LCR:

Table of Contents

After applying grease on pivot (10), insert steel

ball in casing.

After assembling piston seal (5) and steel ball (9)

in 1, 2 speed piston (4), insert piston in hole of

Check whether piston sticks in hole.

Use piston seal jig.

Mount ball bearing (7) on shaft (6) by shrink fit.

Insert shaft in casing.

Take care not to damage oil seal.

Assemble swash plate (11) by matching its hole

and steel ball.

Take care not to damage sliding surface.

Troubleshooting