Ipv6 Router Discovery Setup - ZyXEL Communications XS1930-12F User Manual

10/12-port multi-gigabit/sfp+ smart managed l2 switch 12-port multi-gigabit smart managed poe switch
Table of Contents

Advertisement

Table 44 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Neighbor Discovery Setup (continued)
LABEL
NS Interval
Reachable
Time

8.10.9 IPv6 Router Discovery Setup

Use this screen to configure router discovery settings for each interface. Click the link next to IPv6 Router
Discovery Setup in the IPv6 Configuration screen to display the screen as shown next.
Figure 82 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Router Discovery Setup
The following table describes the labels in this screen.
Table 45 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Router Discovery Setup
LABEL
Interface
Flags
Minimum Interval
Maximum Interval
Chapter 8 Basic Setting
DESCRIPTION
This field displays the time interval (in milliseconds) at which neighbor solicitations are re-sent for
this interface.
This field displays how long (in milliseconds) a neighbor is considered reachable for this interface.
DESCRIPTION
Select the IPv6 interface you want to configure.
Select the Managed Config Flag option to have the Switch set the "managed address
configuration" flag (the M flag) to 1 in IPv6 router advertisements, which means IPv6 hosts
use DHCPv6 to obtain IPv6 stateful addresses. De-select the option to set the flag to 0 and
the host will not use DHCPv6 to obtain IPv6 stateful addresses.
Select the Other Config Flag option to have the Switch set the "Other stateful
configuration" flag (the O flag) to 1 in IPv6 router advertisements, which means IPv6 hosts
use DHCPv6 to obtain additional configuration settings, such as DNS information. De-select
the option to set the flag to 0 and the host will not use DHCPv6 to obtain additional
configuration settings.
Specify the minimum time interval (from 3 to 1350 seconds) at which the Switch sends
router advertisements for this interface.
Note: The minimum time interval cannot be greater than three-quarters of the
maximum time interval.
Specify the maximum time interval (from 4 to 1800 seconds) at which the Switch sends
router advertisements for this interface.
XS1930 Series User's Guide
112

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xs1930-12hpXs1930 seriesXs1930-10

Table of Contents