Connect Sensors/Actuators - WAGO 765-1205/100-000 Product Manual

8-channel digital input/output; ethercat; 24 v dc; 2.0 a; 8 × m8 connection

Table of Contents

765-1205/100-000

Connection

Figure 9: Line Topology for EtherCAT

Networks (Module Image May Differ)

9.5 Connect Sensors/Actuators

The sensor/actuator cable powers the connected sensors/actuators and transfers the

sensor and actuator signals.

Note the current load capacity of the supply contacts; see "Rule 3," section Rule 3: Ports

8 Design Power Supply

X01, X02 etc. in

[} 34].

The following figure shows the potential routing of the two load circuits within the module.

Product manual | Version: 2.0.0

8DIO FLD EC DC 24V 2.0A

Table of Contents

Table of Contents