Connect Sensors/Actuators - WAGO 765-1202/0100-0000 Product Manual

Connection

9.5 Connect Sensors/Actuators

The sensor/actuator cable provides power to the connected sensors/actuators and trans-
fers the sensor and actuator signals.
Note the current load capacity of the supply contacts; see "Rule 3" in
Supply
The following figure shows the potential routing of the two load circuits within the module.
50 Product manual | Version: 1.0.0
16DIO FLD EC DC 24V 2.0A
Figure 7: Line Topology for EtherCAT
[} 33], section Rule 3: Ports X01, X02 etc.
765-1202/0100-0000
®
Networks (Module Image May Differ)
8 Design Power