765-1505/100-000
Connection
Figure 9: Network Topology (Module Appearance May Differ)
9.5 Connect Sensors/Actuators
The sensor/actuator cable powers the connected sensors/actuators and transfers the
sensor and actuator signals.
Note the current load capacity of the supply contacts; see "Rule 3," section Rule 3: Ports
8 Design Power Supply
X01, X02 etc. in
[} 35].
The following figure shows the potential routing of the two load circuits within the module.
Product manual | Version: 2.0.0
53
8DIO FLD EI DC 24V 2.0A