WAGO 765-1205/100-000 Product Manual page 73

765-1205/100-000
ð If you have entered a known username correctly, you can now work with the WAGO
I/O Field Webserver with this user's specified rights. The username that was used to
log on is shown in the upper left-hand corner. The Sign in menu item changes to
Sign out.
Logging Users off
Proceed as follows to log a user off:
• From the Webserver main menu (left), select the Sign out menu item.
ð You can now no longer work in the WAGO I/O Field Webserver with the rights you
had been using till this point. The username used to log on is no longer shown in the
upper left-hand corner. The Sign out menu item changes back to Sign in.
Guest User Access
By default, the Webserver recognizes the user guest without a password; this was set
up for initial access or guest access.
Initial Login as Administrator
Upon delivery or after a reset to the factory settings, the WAGO I/O Field Webserver can
be accessed with the username root and password password. This combination has
administrator rights.
Note
Change the administrator password immediately after commissioning. The factory
default setting is widely known and does not provide adequate protection.
The Administration tab provides role-based user administration. It allows you to create
and delete users and assign them roles, which their rights depend on. Users can be di-
vided into three roles:
• Maintenance
• Operator
• Administrator
Creating a New User
When "User administration" opens, the following screen appears:
Product manual | Version: 2.0.0
8DIO FLD EC DC 24V 2.0A
Commissioning
73